How to change the Gateway on Linksys PAP2 VOIP Adapter

1. Connect an analog phone to the RJ-45 connector on the PAP2.

2. Using the telephone keypad, press the star key (*) four (4) times: ****. You will hear the IVR Menu voice and be prompted to enter a code.

3. Enter 130 followed by the pound (#) key, you will hear the existing gateway IP on the phone.

4. To change Gateway IP enter 131 followed by the pound (#) key. You will hear the menu “enter value followed by pound key “.

5. Enter the gateway IP, 192.16.1.x (to enter dot (.)  Dial * button), followed by the pound (#) key. You will hear press 1 to save (Example - 192*16*1*254 # or 192*16*1*1 #).

6. Press 1, you will hear value saved. Hang up the phone and wait for all indicators light up on the adapter.

7. Then follow the step 3 and make sure you configured the Gateway properly.